Opticenter

opticenter

What is opticentric ®?

With its extremely high degree of centration accuracy and integrated operation, OptiCentric ® systems are indispensable in modern optics productions.

How can I test my opticentric® system?

For the time-saving and comprehensive testing of lens systems, all OptiCentric ® systems can be enhanced by the measuring option for center thickness and air gap testing. The manual alignment of cemented elements by malling or air blasts can be carried out with all OptiCentric ® systems.

Which opticentric ® system should I Choose?

All OptiCentric ® systems with air bearing are suitable for the testing of optical systems incl. all interior surfaces. If the system is made up of more than 20 surfaces, the Dual variant is recommended, and for measuring air gap and center thickness the version 3D.

What is the opticentric® 800 up used for?

The OptiCentric® 800 UP is recommended for the testing and alignment of the largest sized lens assemblies – up to a diameter of 800 mm. The expansion stage 3D permits the complete opto-mechanical characterization of mounted optical systems using the OptiCentric ®.

What is the opticentric® system?

The OptiCentric ® system, equipped with an autocollimator head with reticle and corresponding head lens, is used for measurement in reflection. To perform the measurement the measurement head with the head lens is focused on the center of curvature of the lens surface being tested.

What is opticentric ® linear?

OptiCentric ® Linear makes fast and precise measurement of immovable samples in any orientation (e.g. horizontal) The user of an OptiCentric ® system controls the entire measurement, alignment and cementing process via the OptiCentric ® software.

What is the opticentric ® 100?

The OptiCentric ® 100 permits centration testing as well as cementing and bonding of lenses with a diameter of 0.5 mm to 225 mm. Motorized or manual stage with 450 mm travel path as standard, (optional 250 mm or 550 mm) Highly precise lens centering measurement, alignment and assembly systems

Which opticentric ® system should I Choose?

All OptiCentric ® systems with air bearing are suitable for the testing of optical systems incl. all interior surfaces. If the system is made up of more than 20 surfaces, the Dual variant is recommended, and for measuring air gap and center thickness the version 3D.

What is the opticentric® system?

The OptiCentric ® system, equipped with an autocollimator head with reticle and corresponding head lens, is used for measurement in reflection. To perform the measurement the measurement head with the head lens is focused on the center of curvature of the lens surface being tested.

What is the opticentric ® 100?

The OptiCentric ® 100 permits centration testing as well as cementing and bonding of lenses with a diameter of 0.5 mm to 225 mm. Motorized or manual stage with 450 mm travel path as standard, (optional 250 mm or 550 mm) Highly precise lens centering measurement, alignment and assembly systems

How can I test my opticentric® system?

For the time-saving and comprehensive testing of lens systems, all OptiCentric ® systems can be enhanced by the measuring option for center thickness and air gap testing. The manual alignment of cemented elements by malling or air blasts can be carried out with all OptiCentric ® systems.

What is the difference between opticentric Metro and Opti centric pro?

OptiCentric® METRO – for metrology and comprehensive measurement of optical systems. OptiCentric® PRO – for production and assembly of objective lenses. OptiCentric® METRO instruments are designed to measure centering errors and other parameter of lenses and optical systems.

Postagens relacionadas: